通过CLI命令行定时重启无线控制器！

以往，通过WCS的controller template功能可以自定义无线控制器的重启时间。

从CUWN 6.0版本开始，如果您没有订购WCS，也可以通过无线控制器的CLI命令行设定定时重启。

命令行语法如下：

(Cisco_4402_WLC) >reset system ?
at             Reset the system at a specified time.
in             Reset the system after a specified delay.
cancel         Cancel a scheduled reset.
notify-time    Configures trap generation prior to scheduled resets.

Reset System In -> 用于指定在多长时间后重启，还可定义以主用系统软件还是备用系统软件来启动。
(Cisco_4402_WLC) >reset system in 00:01:30 image no-swap reset-aps save-config
System reset is scheduled for Oct 16 22:58:56 2010.
Current local time and date is Oct 16 22:57:26 2010.
Trap will not be generated as total delay is less than the trap time.
Use 'reset system cancel' to cancel the reset.
Configuration will be saved before the system reset.
(Cisco_4402_WLC) >

Rest System At ->  用于指定具体重启时间，还可定义以主用系统软件还是备用系统软件来启动。
(Cisco_4402_WLC) >reset system at 2010-10-16 23:05:00 image no-swap reset-aps save-config
System reset is scheduled for Oct 16 23:05:00 2010.
Current local time and date is Oct 16 23:02:06 2010.
Trap will not be generated as total delay is less than the trap time.
Use 'reset system cancel' to cancel the reset.
Configuration will be saved before the system reset.
(Cisco_4402_WLC) >

Reset System Cancel -> 取消已经设定的重启事件
(Cisco_4402_WLC) >reset system ?
at             Reset the system at a specified time.
in             Reset the system after a specified delay.
cancel         Cancel a scheduled reset.
notify-time    Configures trap generation prior to scheduled resets.

Show Reset -> 查看设定的重启事件
(Cisco_4402_WLC) >show reset
System reset is scheduled for Oct 18 10:00:00 2010.
Current local time and date is Oct 16 23:28:15 2010.
All APs will also be reset.
A trap will be generated 10 minutes before each scheduled system reset.
Configuration will be saved before the system reset.